Why is My Netgear WiFi Extender Not Working? Can You Help?
One of the most common practices followed by networking geeks these days is the installation of a Netgear range extender. The reason is the name of the brand and the astonishing features housed by its networking gadgets. It means those who setup Netgear Nighthawk prepare themselves for an exciting online experience. Despite that, there comes a percentage of users that say “Why is my Netgear WiFi extender not working, and what can be done to resolve it?”
Does your name also lie under the percentage of users having similar complaints? If yes, then you must know that your WiFi extender requires a stable power supply to function well. Therefore, a weak or fluctuating power supply becomes the number 1 reason due to which the extender denies working properly.
Address Power-Related Issues in the First Place
Don’t think why is my Netgear WiFi extender not working. Focus on addressing the power-related issues in the first place. We’ve already mentioned that a weak power supply is dragging your WiFi device to this fate. We will provide you with different solutions to fix power-related issues and make your extender functional again. After that, you can pick the most convenient one.
|S. No.||Reason Behind Weak Power Supply||Solution||Verdict|
|1||Damaged wall socket||Get the socket repaired OR
Use another power socket
|You need to call an electrician for this (needs a lot of time) OR
Simply connect the extender to another socket and enjoy
|2||Random power outages||Use a UPS to power up your range extender||It will require no effort plus UPS will cope with power surges and outages both|
After implementing the aforementioned workarounds, check if your range extender has started functioning or not. If not, then you are supposed to try your hands on the hacks given in the sections given below to fix the problem.
Reasons Why is Your Netgear Extender Not Working
Improper power was the first reason that created the problem and forced you to think “Why is my Netgear WiFi extender not working?” But, there are some other reasons also due to which a networking device ceases to work. We have shared them with you through the below-mentioned points:
1. Outdated Firmware: Firmware is the governing software of the extender. Running the extender on outdated firmware is never recommended. You must stick to this rule in every case.
2. Overheated Extender: Are you among those users who make their WiFi extenders work 24/7? Well, this can be the reason why your extender is not working. This is because whenever a networking device overworks, it is likely to get overheated.
You’ve gained enough knowledge about the reasons stopping your extender from working. Therefore, without wasting any time, let us shift your attention to the hacks that can put an end to your thoughts regarding the non-working status of your WiFi extender.
Why is My Netgear WiFi Extender Not Working (Fixes)
This is to inform you that implementing one of the following techniques requires you to access the web-based management utility of the extender. Thus, you can drop the idea in case your extender is not ready to work anyhow.
Update the Firmware
Access mywifiext.net on a computer cabled to your Netgear WiFi range extender and log in to it using the valid admin details. Once done, find the Firmware Update option and click it to know if a new firmware version is available. Follow the on-screen prompts to complete the process.
Power Cycle the Extender
Power cycling the WiFi range extender is recommended if it is not ready to work. For this, you are required to disconnect it from the main router and power it down after that. Now, keep it in the rest mode for 10-15 minutes and power it up again. Has your extender started working now?
Still Thinking Why is My Netgear WiFi Extender Not Working?
If you are still unable to make your Netgear range extender work, then you are left with only one solution – factory default reset. Since you cannot access the web-based management utility of the extender, it is advised that you go for the hard reset method. Here’s how to complete the WiFi extender reset process:
- Be certain that your Netgear WiFi extender is connected to a working power source.
- Now, grab a paper clip or pin and insert it into the hole labeled RESET.
- The button inside the hole is supposed to be pressed for 8-10 seconds.
- Your extender will start working but on the default factory settings.
You just cannot sit and think why is my Netgear WiFi extender not working whenever the situation shows up. Instead, take the aid of the hacks given in the post to fix the problem. Now, we hope that your extender has returned to its normal working state after the reset process. You only need to reconfigure it through the mywifiext.net URL.