How to Connect Netgear WiFi Extender to New Router?

Replacing a WiFi router with a new one has become a common thing these days. Users can be seen buying new routers because of the unsatisfactory performance of their existing routers. However, this replacement complicates things when a range extender is also installed in the house. Netizens often find it difficult to connect their extenders to new routers. Just in case you have replaced your old WiFi router coupling a Netgear range extender with a new one, consider walking through the information given in the blog. Here, you’ll learn how to connect Netgear WiFi extender to new router using two different approaches.

Before Everything Else

The connection of the router and extender is a secondary thing to do. First of all, you will have to reset the extender. It is because, if you do not reset the extender, it will try to extend the signals of the old router that doesn’t even exist now. As a result, you’ll face issues connecting your WiFi devices.

In order to reset your extender, you have to look for and press the Reset button located on it with the help of a paper clip or another pointed object. Keep the button pressed for at least 30 seconds and release it. You’ll soon notice that your range extender has started running on the default factory settings. You need to setup Netgear Nighthawk in case you wish to connect it to a new WiFi router.

Now, let us tell you about the approaches that can be used to connect the WiFi range extender to a new router.

Methods to Connect Netgear Extender to New WiFi Router

Two different methods that can be used to create a connection between the Netgear WiFi extender and a new router are mentioned as follows:

• WPS Method: The WPS method, also known as the Push button configuration method, lets the user connect Netgear extender to new WiFi router just with the push of a button. No cables are required in this approach.
• Nighthawk App: The second method that allows the user to join a Netgear range extender with a new router is the Nighthawk app. This method requires an Ethernet cable to create a direct connection between the extender and router.

Moving on, let’s pay attention to the instructions on how to connect Netgear WiFi extender to new router and set it up using the aforementioned methods.

Connect Netgear Extender to New Router [WPS Method]

Here are the instructions that you need to follow if you wish to connect your WiFi range extender to a new router using the WPS method:

Place the Extender Close to Router

First of all, place the WiFi extender in the same room where your newly purchased router is already doing its job. In case your router is powered up, turn it off and wait for a few minutes. Now, power it up and then your Netgear WiFi range extender.

Press the WPS Button

Once your devices are fully powered up, consider looking for the WPS button on the extender and pressing it. Within 2 minutes, press the button with the same label on the router. If your range extender is dual-band, press the button again. Let the WPS LED glow green.

The connection between your Netgear Nighthawk range extender and the new router has been successfully established. It means the setup process has been completed. You can start using the internet now.

Extender-Router Connection [Nighthawk App]

To learn how to connect Netgear WiFi extender to new router using the Nighthawk app, you need to follow the instructions rounded up here:

Create an Ethernet Connection

Place the extender and router in the same room. Turn them off if they are powered on. Now, run an Ethernet cable from the new router’s LAN port to the Nighthawk extender’s Internet port. Be sure to create a strong connection.

Follow the Instructions on the Nighthawk App

Now, launch the Netgear Nighthawk app on a mobile phone or tablet connected to the network of the range extender. You can easily discover the extender’s network with the name – Netgear_ext. After that, launch the Nighthawk app and log in to it using your Netgear account or the extender login details. Lastly, follow the on-screen prompts.

This is how to connect Netgear range extender to a new router using the Nighthawk mobile application. To achieve success with the process, ensure that you are using the latest stable version of the app.

Wrapping Up

Now, we are wrapping up the guide focusing on the instructions on how to connect Netgear WiFi extender to new router. We hope that by using any of the methods given above, you will be able to get success with the connection-creation process.