2 Different Ways for Netgear Nighthawk Setup without App
A Netgear wireless range extender can be easily installed or managed using the Nighthawk app that is available for both the devices such as Android or iOS. Just in case, you find using the app a bit tough, then no need to worry. There are other ways that can help you to finish the configuration process of your Netgear Nighthawk device. So, without wasting time, walk through this guide and know how to perform Netgear Nighthawk setup without app.
Steps to Do Netgear Nighthawk Setup Without App
The approach to performing Netgear Nighthawk extender setup without an app is quite easy. You can use any of the methods which is easier for you.
1. WPS Method
2. Manual Method
Netgear Nighthawk Setup via WPS Button
The very first method to configure the Netgear Nighthawk wireless range extender is by using the WPS button. If you don’t know how to use this method to install the range extender, then follow the instructions mentioned ahead:
- Firstly, locate the extender near to the home router. At the time of the setup, you need to place them closer. However, you can move the extender to the required area to extend the network once the configuration is complete.
- Now, find a button on the extender that is labeled WPS.
- Once you find it, press it carefully.
- Go ahead, locate, and press the WPS button on the WiFi router in the same way.
- Wait for a little while, to sync the both devices.
Congratulations! The process to configure the Netgear Nighthawk extender using the WPS button is finished. But, some networking devices do not have a physical WPS button on them. In that case, you can log in to the web interface using the web GUI method.
Netgear Nighthawk Setup via Manual Method
Another method to setup Netgear Nighthawk extender is by using the web GUI method. Follow the steps given below to complete the process.
Position the Extender
First of all, place the Netgear Nighthawk range extender and host router in the same room and on a higher surface. But, away from the corners, electronic devices, reflexive surfaces, metal objects, and home appliances. The reason being, they do not communicate properly.
Plug It In
Now, insert the power adapter of the extender into a well-working power socket. Make sure that your device receives a stable and adequate power supply. On the off chance, if the electrical outlet is faulty, plug the extender into another socket.
Connect WiFi Devices
The next step is to connect the Nighthawk range extender to the home router with the help of an Ethernet cable. To learn how to connect them in detail, connect the LAN port of the router to the port of the extender using the cable. Be sure that the power cable connection between the devices is firm and secure.
Run an Internet Browser
Switch on your client device and open a web browser on it. You can prefer any browser to use the most often. Ensure that whatever browser you choose is updated to its latest version.
Access the Default Web Address
Now, head over to the address bar or location field and enter the default web address. The default web URL for Windows is www.mywifiext.net. Just in case, you use the Mac device then use the www.mywifiext.local web address. Hit the Enter key to make your way to the next page.
Enter Login Details
When you are on the Netgear Nighthawk extender login window, fill up the default user name or password. Take the help of the user manual if you are not sure about the admin credentials. Be careful while entering the details and keep the Caps Lock key off on your keyboard. The reason is, they are case-sensitive.
Follow the On-screen Instructions
As soon as you click on the Log In button, the BASIC Home screen will appear To complete the Netgear Nighthawk extender setup follow the on-screen instructions.
The Final Note
Now, you know how to perform Netgear Nighthawk setup without app using either the manual method or the WPS method. The moment you are done with the configuration and relocation of your range extender, connect other devices to its network and check the signals.