192.168.1.250 – Netgear Extender IP Address

If you’re unable to access the Netgear extender login page using the web address “mywifiext.net”, you can try another default gateway called 192.168.1.250. If you don’t know how to access the default Netgear extender IP address, then walk through the page! We’ll give you a simple, step-by-step guide to accessing the IP without any problems. Keep reading!

How to Log In to Netgear Extender?

Here are the most simple and effective steps to access the 192.168.1.250 IP address of the Netgear extender:

Step 1: Connect Extender to Router

First of all, make a strong connection between the router and extender to get the internet.
You can use the LAN cable to make the connection between the devices.
The cable should be non-damaged and properly inserted into the LAN ports of the devices.

Step 2: Connect Extender Network to Computer & Laptop

Now you have to connect the extender networks to the device you can use any one of these computers, laptop, or mobile.
To connect the extender to the computer, you can use the Ethernet cable.
Insert one end of the cable in the extender and another in the computer.

Step 3: Open Internet Browser

Now power on the computer.
Launch a web browser on your device (e.g., Google Chrome, Mozilla Firefox, Safari, etc.).
If the browser you use is outdated, then updated it at the same time.

Step 4: Enter the IP Address

In the address bar of your web browser, type “192.168.1.250”.
Press Enter.
This will take you to the Netgear extender login page.

Step 5: Log In to Netgear Extender

On the login page, you will be prompted to enter your username and password.
These credentials are usually provided on the extender or in the documentation.
If you haven’t changed them, you can try using the default username and password provided by Netgear (check the user manual).

Step 6: Access the Netgear Genie Setup Wizard

After entering the correct login credentials, click on the “Log In” button to access the extender settings.

Important Note: It’s highly recommended to change the default username and password for security purposes. This will prevent unauthorized access to your extender settings.

That’s it, by following these simple steps; you will able to access the extender login page using the Netgear WiFi extender IP address i.e. 192.168.1.250. If you encounter any issues, then implement the hacks that are mentioned in the next section.

Why is 192.168.1.250 Not Working?

Sometimes, you may face “can’t log into 192.168.1.250” issue. There are some most common reasons and the corresponding solution:

Internet Connectivity Issue.
Wrong Configuration.
Hardware or Software Problem.
Firewall & Security Issues.
Outdated Web Browser.

192.168.1.250 Not Working | Solutions

1. Ensure that the extender is properly connected to the router network. Check the LAN CABLE or Wi-Fi connection to ensure they are securely connected. Restart the router or access point to refresh the network connection.

2. Verify that the network settings on the NETGEAR EXTENDER are correct. Make sure the default gateway, and DNS settings are properly configured. If any settings are incorrect, update them accordingly.

3. There could be hardware or software issues on the device itself. It is possible that the network adapter or network settings on the device are malfunctioning. To fix this issue checking device drivers, and UPDATING FIRMWARE.

4. Check the device’s FIREWALL OR SECURITY settings. Disable any unusable settings that might be blocking network access. If necessary, use the device user manual to properly configure the firewall or security settings.

5. Use the UPDATED BROWSER to access the Netgear extender IP address 192.168.1.250 because outdate browser does not support the internet activities sometimes.